Kitting & Sub-Assembly Services
Manufacturing kitting services for electronics, harnesses, and build-station-ready sub-assemblies.
This is not 3PL or ecommerce fulfillment. If you need pick-pack-ship for online orders, we are the wrong vendor. If you need per-BOM kits for a manufacturing floor, we do that every day.
Case Study
Station Kits for a Harness Build
A hardware team needed repeatable kits for a pilot run with multiple harness variants. Loose parts were slowing the build and making shortages invisible until the bench was already blocked.
We converted the BOM into station-labeled bags, prepped connector sub-assemblies, tracked alternates, and kept a kit record for each build revision.
- Per-BOM
- kitting records
- Station
- labeled bags
- Daily
- shop-floor workflow
Quote Checklist
Quote the Kit, the Sub-Assembly, or Both
Kitting pricing depends on BOM maturity, line count, sourced parts, bagging rules, labeling, sub-assembly labor, and revision control. Send the checklist inputs so we can keep materials, kit labor, and assembly assumptions visible.
What to Include for a Fast Quote
- BOM with revision
- Quantities per kit and number of kits
- Bagging and labeling rules
- Which parts you supply vs we source
The Problem
Loose Parts Hide Manufacturing Problems
Fulfillment Mismatch
3PLs pick and ship boxes. They do not verify terminals, check crimp tooling, or cut wire to length for a build.
BOM Drift
Revision changes, substitutions, and shortages break builds when kits are not tied to the BOM.
Bench Waste
Assemblers should not spend build time hunting bags, terminals, labels, or missing hardware.
The Solution
Kitting From an Actual Manufacturing Floor
MiniProto kits parts for our own harness and assembly work, so customer kits follow the same practical rules: count it, label it, tie it to a BOM, and make it easy to build.
Custom kitting services
Kitting and assembly services
Kingston, NY manufacturing support
Kitting Capabilities
BOM Procurement, Bags, and Sub-Assemblies
Manufacturing Kits
Electronics, harness, connector, hardware, and label kits packed for the way your build station actually consumes them.
Per-BOM Kitting Records
We run kitting operations daily on our own shop floor and keep kit records tied to the BOM and revision.
BOM Procurement
Connector, wire, terminal, heatshrink, hardware, and accessory sourcing with substitutions surfaced before the kit is released.
Labeled Bags
Bags, bins, and sub-kits labeled by assembly, station, step, or customer part number.
Sub-Assemblies
Harness pigtails, connector leads, prepared hardware, and mechanical sub-assemblies built before final assembly.
Prototype to Low Volume
Small runs, revision churn, and engineering builds that are too specialized for generic fulfillment workflows.
Process
From BOM to Build-Station Kit
Intent Check
We confirm this is manufacturing kitting, not ecommerce or 3PL fulfillment.
BOM and Revision Review
We check the BOM, drawings, quantities, alternates, and packaging requirements before procurement starts.
Procure and Receive
MiniProto-sourced and customer-supplied materials are received, counted, labeled, and tied back to the kit record.
Bag and Build
Parts are packed by build station or sub-assembly, with harness and connector prep handled in-house when scoped.
Ship or Feed Production
Kits either ship to your build site or flow directly into MiniProto assembly.
Documentation and Deliverables
Kitting Records That Survive Revision Changes
Useful Inputs
- BOM with quantities and revision
- Bag labels, station names, or work instructions
- Customer-supplied material list
- Sub-assembly drawings or photos
Typical Deliverables
- Labeled bags or bins by build station
- Per-BOM kitting record
- Procurement and shortage notes
- Prepared harness or mechanical sub-assemblies
Customer Fit
Manufacturing Kits, Not Fulfillment
Good Fit
- Electronics or harness kits
- Labeled bags per build station
- BOM procurement and shortage control
- Sub-assemblies before final build
Not a Fit
- Ecommerce pick-pack-ship
- Marketplace fulfillment
- Warehousing for consumer orders
- Subscription-box assembly
Kitting FAQ
Common Questions About Kitting Services
Are these ecommerce kitting services?
No. This service is for manufacturing kitting: electronics kits, harness kits, sub-assemblies, BOM procurement, and labeled bags for build stations.
Can you kit wire harness components?
Yes. We can kit connectors, contacts, seals, wire, labels, sleeve, heatshrink, hardware, and prepared harness sub-assemblies.
Can you procure the BOM?
Yes. We can source BOM items, track substitutions, and call out long-lead or obsolete parts before release.
Do you build sub-assemblies too?
Yes. Kitting and assembly services can include harness pigtails, connectorized leads, mechanical prep, and other sub-assemblies.
Do you keep kitting records?
Yes. Our own shop floor depends on per-BOM kitting records, so customer kits follow the same discipline.
What quantities are a good fit?
Prototype, pilot, and low-volume manufacturing kits are a good fit. High-volume fulfillment work belongs with a 3PL.
Ready to Get Started?
Send the BOM and Build Flow
We will quote the kitting labor, procurement assumptions, and any sub-assembly work separately.
Quote Kitting Work