8 ContactsQuote
Wireframe pending
83723 8-Circuit Control Lead
Medium-density circular connector harness for equipment control wiring.
Request A QuoteMil-Spec Circular Connector Reference
MIL-DTL-83723 Connectors
MIL-DTL-83723 covers medium-density, environment-resistant circular connectors often used where equipment needs a rugged circular interface but the design does not call for MIL-DTL-38999 density or MIL-DTL-5015 size.
MIL-DTL-83723CAD / Connector Bay
Wireframe pending
8-28 TypicalShell Sizes
I / II / IIISeries
Spec-Sheet SetInsert Arrangements
Shell Sizes8-28 Typical
SeriesI / II / III
Insert ArrangementsSpec-Sheet Set
Contact TypeRemovable Crimp
What MIL-DTL-83723 Covers
MIL-DTL-83723 is a severe-environment circular connector family used in aircraft, vehicles, ground equipment, and industrial harnesses. It sits between older large threaded circulars and high-density 38999-style connectors in many selection conversations.
The spec includes multiple series and shell styles, so the exact coupling, insert arrangement, class, finish, and accessory stack matter. Series and manufacturer catalog details should be checked before assuming interchangeability.
For quoting, MiniProto needs the connector callout or mating part, shell size, insert arrangement, contact gender, wire gauge, backshell or clamp, environmental requirements, labels, and acceptance test requirements.
MiniProto RoleBuilt Assembly
OEM pages from Amphenol, Glenair, and similar manufacturers sell connector parts. MiniProto turns the selected plug, receptacle, contacts, backshells, wire, labels, and test requirements into a built harness assembly with prototype-friendly ordering.
MIL-DTL-83723 Shell Size And Insert Arrangement Table
Representative arrangements for connector selection and quoting. Final part numbers still depend on shell style, class, finish, keying, contact gender, and backshell choice.
| Visual | Shell Size | Insert Arrangement | Contact Count | Contact Size | Common Use |
|---|---|---|---|---|---|
CAD pending | 8 | 8-3 | 3 | 20 | Small sensor and control circuits |
CAD pending | 10 | 10-5 | 5 | 20 | Compact signal harness breakpoint |
CAD pending | 12 | 12-8 | 8 | 20 | Low-current equipment wiring |
CAD pending | 14 | 14-15 | 15 | 20 | Medium signal interface |
CAD pending | 16 | 16-24 | 24 | 20 | Panel-to-device control harness |
CAD pending | 18 | 18-32 | 32 | 20 | Dense control and instrumentation wiring |
CAD pending | 20 | 20-39 | 39 | 20 | Larger circular I/O |
CAD pending | 24 | 24-61 | 61 | 20 | High pin-count signal interface |
CAD pending | 28 | 28-21 | 37 | 16 | Mixed control layouts with larger contacts |
Build With This Connector
Common starting points for a MIL-DTL-83723 harness build. Send your circuit count, part numbers, or a drawing and we quote the full assembly: connectors, contacts, wire, backshells, labels, and testing.
24 ContactsQuote
Wireframe pending
83723 24-Circuit Panel Harness
Panel-to-device assembly with labeled conductors and continuity test.
Request A QuoteMating PartQuote
Wireframe pending
83723 Mating-Part Quote
Send the equipment-side connector and we will quote the harness-side mate and build.
Request A QuotePrototype-Friendly Assembly
Parts are only half the job.
MiniProto is set up for low-volume and prototype harnesses: connector sourcing, wire cutting, labeling, crimping, continuity checks, and IPC/WHMA-A-620 workmanship inspection practices. Typical lead time depends on connector availability and assembly scope.
Drawing Intake
Send the connector callout or mating part and we will map it into a quoteable harness build.
Prototype Runs
Low-volume 83723 assemblies can be quoted without waiting for a full production release package.
Workmanship
Crimping, insertion, backshell installation, labeling, and inspection can be aligned to IPC/WHMA-A-620 expectations.
Lead Time
Connector lead time is checked before quoting so the harness schedule reflects real supply, not just labor capacity.
Series And Variant Choices
Series IBayonet
Common quick-disconnect style for environment-resistant harness interfaces. Confirm exact shell and keying details against the selected manufacturer catalog.
Series IIThreaded
Threaded styles are used where coupling security and legacy drawing compatibility drive the selection.
Series IIISevere Duty
Often selected for higher-performance environmental and vibration requirements. Exact ratings depend on class, finish, backshell, and assembly.
Cost Drivers
Callout PrecisionHigh
83723 options vary by series, shell style, class, and manufacturer. A complete part callout prevents re-quote loops.
AvailabilityHigh
Less-common shell, finish, keying, or class combinations can drive lead time more than harness labor.
Test ScopeMedium
Continuity-only builds are faster than assemblies requiring hipot, insulation-resistance, shielding, or documented acceptance test records.
Related Links
Compare Other Mil-Spec Circulars
Common Questions
What is a MIL-DTL-83723 connector?+
It is an environment-resistant circular connector specification covering multiple series, shell styles, insert arrangements, removable crimp contacts, and accessories for rugged harness interfaces.
How is MIL-DTL-83723 different from MIL-DTL-38999?+
MIL-DTL-38999 is typically the higher-density modern severe-environment family. MIL-DTL-83723 is often selected from legacy drawings or medium-density rugged circular connector requirements.
How is MIL-DTL-83723 different from MIL-DTL-5015?+
MIL-DTL-5015 is the older AN-type threaded family with many large power and signal arrangements. MIL-DTL-83723 is generally a more compact severe-environment circular family with removable crimp contacts.
What shell sizes does MIL-DTL-83723 use?+
Common manufacturer catalogs show shell sizes in the smaller circular range, often around 8 through 28 depending on series and style. Verify the exact series catalog before locking a drawing.
Are MIL-DTL-83723 connectors bayonet or threaded?+
The family includes multiple series and coupling styles. The connector part number or drawing callout determines whether the build uses a bayonet or threaded style.
Can I replace a MIL-DTL-83723 connector with MIL-DTL-38999?+
Not directly. A replacement requires checking panel cutout, mating interface, insert arrangement, contact ratings, backshell, environmental class, and qualification requirements.
What information is needed to quote a MIL-DTL-83723 harness?+
Provide the full connector callout or mating part, contact gender, wire gauge and length, labels, backshell or clamp, shielding requirements, and required electrical tests.
Can MiniProto build MIL-DTL-83723 assemblies before the online configurator is seeded?+
Yes. The online starter configs are opening soon, but quote intake can handle drawings, mating parts, and requirements now.
MIL-DTL-83723 Harness Assemblies
Build the assembly, not just the connector BOM.
Configure online when the family seed lands, or send drawings and requirements now for an engineer-reviewed quote.